This is the "MAC - Creating Your Table of Contents" page of the "How to Format an Appellate Brief" guide.
Alternate Page for Screenreader Users
Skip to Page Navigation
Skip to Page Content

How to Format an Appellate Brief  

This guide was developed by Cynthia Condit for the University of Montana School of Law William J. Jameson Law Library. Used with permission.
Last Updated: May 27, 2015 URL: http://libguides.law.rutgers.edu/content.php?pid=672980 Print Guide RSS Updates

MAC - Creating Your Table of Contents Print Page
  Search: 
 
 

CREATING YOUR TABLE OF CONTENTS (Using a MAC and Word 2011)


The 2 basic steps to creating your Table of Contents:

  • Apply heading styles and levels to the items you want to include in your TOC
  • Generate and insert your TOC into your document

Some Preliminaries:

  • Your document headings will have different levels.  Word permits several levels, but for demonstration purposes we use 3 heading levels.
      • Main Headings = Level 1
      • Sub Headings = Level 2
      • Sub sub headings = Level 3
  • Note: 
    • "Cover Page" is typed on section 1 to serve as a marker for now.
    • The title "Table of Contents" does NOT appear within the Table of Contents; it only titles the page.  Thus, you begin applying headings at "Table of Authorities." 

First: Assign heading levels and styles:

  1. To assign a heading level and style > highlight your first heading (e.g., "Table of Authorities" in section 2) > Home tab > Styles subtab > click the ¶ icon > select Heading 1 style (because TOA is a Level 1 heading)

Next: Format your heading:

  1. Note: Word gives you default formatting; BUT we want it to match our format (meaning the format designated by your professor)
  2. Highlight heading > Home tab > Styles subtab > click the ¶ icon > open Heading 1 drop down by scrolling over the ¶ symbol and clicking on the arrow > Modify > dialog box opens
  3. Make formatting selections using dialog box options and/or by clicking Format drop down and selecting Font, Paragraph etc.
  4. Note: 
    1. Level 1 Headings are usually centered, not indented (but...check your professor's instructions)
      1. To center a heading use the Center icon or Command-E
    2. Level 2 (& 3 etc.) headings may be indented (but...check your professor's instructions)
      1. Below are suggested indents.  You may have to play around with other numbers to find ones that provide the appearance you want.
        1. Click Format drop down > Paragraph
        2. A first level indent:  Left > set at .3" > Right > set at .3"
        3. A second level indent:  same process > use .6" and .3"
        4. A hanging indent at first level > Left > set at .3" > click Special > select Hanging Indent > enter .2" for "By"
    3. To adjust Spacing > click Format drop down > Paragraph
      1. For spacing Before/After heading > enter the pt desired (e.g., 12pt for each)
      2. For spacing within a heading > select Line Spacing desired (e.g., single)
    4. To number a Heading > click Format drop down > Numbering
      1.    Select a numbering Style > OK
  5. Click "Automatically Update" box

Next: Adopt heading style througout document:

  1. You want the computer to remember whenever you assign a level and style to a heading and to adopt these selections througout the document
  2. Highlight heading > if Styles box is not already open, begin again at Home > Styles subtab > click ¶ icon > select Heading 1 > open Heading 1 drop down  > click "Update to Match Selection"

Note:  If you make changes later on to a heading that's already been formatted, remember to adopt these changes throughout your document by clicking on "Update to Match Selection" after making them.

Continue to apply heading styles & levels by scrolling to next heading:

  1. IF next heading is a Level 1 Heading > highlight heading > click on Heading 1 at Styles subtab > heading will be formatted automatically
  2. IF next heading is a Level 2 (or 3 etc.) heading > same process as above except select Heading 2 (or 3 etc.)

Note Once a level has been adopted, you will only need to highlight the heading > select appropriate Heading Level at the Styles subtab > heading will be formatted automatically

Remember:  The specific formatting you select will depend on your professor's instructions


Once all the headings are marked, you can generate and insert your TOC


To generate and insert your TOC:

  1. Go to top of your document > place cursor a couple spaces below the title "Table of Contents" (or where you wish the TOC to begin)
  2. Go to Insert (at top Word tool bar) > Indexes and Tables > Table of Contents > dialog box opens
  3. Check that Show Page Number, Alignment, and proper Tab Leader are checked
  4. Click OK > your TOC will appear

Note:  At this point, the formatting of the actual TOC probably does NOT match the formatting in your document so you will need to modify your newly generated TOC.

Making modifications to your newly generated TOC page:

To modify heading sections in the body of your TOC do the following:
  1. Highlight heading > go to Insert (at top Word tool bar) > Indexes and Tables > Table of Contents > Modify > dialog box opens
  2. TOC 1 refers to Heading Level 1 in the TOC (TOC 2 to Heading Level 2 etc.)
  3. Select Heading Level you want to modify (e.g., TOC 1) > Modify > brings up dialog box
  4. Make formatting changes from dialog box options and/or Format drop down
    1. Note: If you want more leader dots between heading and page number > Format drop down > Paragraph > right indent (try .5")
  5. Check "Automatically Update" > OK
  6. After you complete making modifications for all levels > OK > OK > OK > Yes

Other modifications > you may do some or all of the following:

  1. To modify the title "Table of Contents"
    1. To match the title "Table of Contents" to Heading 1 style > highlight title > Styles subtab > click Heading 1
    2. If the title "Table of Contents" will be different from Heading 1 style > make changes at Home tab
  2. To modify individual elements in the body of the TOC (e.g., unwanted portions of underlining, bolding etc.), do the following:
    1. To remove unwanted underlining:
      1. Highlight portion to un-underline > Home tab > click underscore (the unwanted underlining should disappear)
    2. To remove unwanted bolding:
      1. Highlight portion to un-bold > Home tab > click bold (the unwanted bolding should disappear)

Tip:  If you find it difficult to highlight the portion you want (e.g., removing underlining and/or bolding of leader lines and page number), try highlighting backwards from the end of where you want to make a change back to the beginning of the portion you want to change.  Or go back to the Modify process and remove the underlining. Then highlight the area to underline and manually re-insert it using the Home tab underscore.

Description

Loading  Loading...

Tip